GSM-Quectel_updateTID_2_v1.3
| Icon | Breadboard | PCB | Schematic |
 |
 |
 |
 |
Information:
| Fritzing Version: | 0.5.2b.02.18.4756 |
| Module ID: | GSM-Quectel_updateTID_2_v1.3 |
| Version: | 4 |
| Author: | f.althaus |
| Title: | Arduino GSM Shield |
| Label: | Not set at the moment. |
| Url: | http://arduino.cc/en/Main/ArduinoGSMShield |
| Date: | 2013-05-25 |
| tags: | |
| Description: | The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel (datasheet). It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield. The shield uses digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10’s TX pin and pin 3 to its RX pin. See these notes for working with an Arduino Mega, Mega ADK, or Leonardo. The modem's PWRKEY pin is connected to Arduino pin 7. The M10 is a Quad-band GSM/GPRS modem that works at frequencies GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP and HTTP protocols through a GPRS connection. GPRS data downlink and uplink transfer speed maximum is 85.6 kbps. To interface with the cellular network, the board requires a SIM card provided by a network operator. See the getting started page for additional information on SIM usage. The most recent revision of the board uses the 1.0 pinout on rev 3 of the Arduino Uno board. |
FZP and JSON Files:
All image was created with Fritzing.
