Arduino_Leonardo_Rev3(fix)
| Icon | Breadboard | PCB | Schematic |
/icon/Arduino_Leonardo_Rev3(fix)_icon.svg){kind=icon} |
/breadboard/Arduino_Leonardo_Rev3(fix)_breadboard.svg) |
/pcb/Arduino_Leonardo_Rev3(fix)_pcb.svg) |
/schematic/Arduino_Leonardo_Rev3(fix)_schematic.svg) |
Information:
| Fritzing Version: | 0.5.2b.02.18.4756 |
| Module ID: | Arduino_Leonardo_Rev3(fix) |
| Version: | 5 |
| Author: | althaus |
| Title: | Arduino Leonardo (Rev3b) |
| Label: | Not set at the moment. |
| Url: | http://arduino.cc/en/Main/ArduinoBoardLeonardo |
| Date: | 2013-04-03 |
| tags: | |
| Description: | The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. |
FZP and JSON Files:
All image was created with Fritzing.
